Non-woven wallpaper with a concrete look and a soft vintage charm | light grey - 3010503

Before starting work and hanging the wallpaper, please pay attention to the following aspects: check the article number, the batch number, and the pattern repeat symbols. Please keep the control slip and wallpaper samples.

Carefully prepare the surface

Surface preparation – the surface must be dry, sound, capable of absorbing moisture evenly, clean, neutral, and smooth. Old wallpaper and water-soluble coatings must be removed. Cracks and holes should be filled with a spackling compound if necessary, while highly absorbent surfaces must be pre-primed with wallpaper paste (sizing). Old, unstable surfaces that cannot bear a load must be primed with a specially designed wallpaper primer.

Attention! Non-woven wallpaper must be hung on a uniformly colored surface. For this reason, we recommend applying a pigmented base coat under the wallpaper.

The adhesive must be applied directly to the wall.

We recommend using a high-quality, reliable brand of adhesive specifically designed for non-woven wallpaper, and following the preparation instructions provided. Thoroughly mix the non-woven wallpaper adhesive according to the manufacturer's guidelines. Using a roller, apply the adhesive to the wall over the width of the wallpaper roll.

 Hanging the wallpaper.

Hanging non-woven wallpaper always begins "from the light," which means that wallpapering the walls should start near a window. Ensure that the first strip of wallpaper is applied in a perfectly vertical line and properly aligned vertically, so that subsequent strips can be hung straight.

After the wall is coated with adhesive, the non-woven wallpaper is applied directly to the wall and smoothed out with a roller; moreover, this type of wallpaper requires no soaking time. Using a soft wallpapering brush, a cloth, or a microporous rubber roller, press the strip firmly against the wall and smooth it out to prevent the formation of air bubbles.

Trimming the excess and finishing up...

Trim the overhanging edges of the wallpaper at the top and bottom. Hang the subsequent strips of wallpaper perfectly edge-to-edge (butt joint). A conical seam roller can be used at the joints. Please note that strong heat and drafts must be avoided during application and drying. The optimal working temperature ranges from 18 °C to 25 °C.

Additional tips

Another advantage of decorating walls with non-woven wallpaper is that, if applied properly, it can be easily and completely removed dry from the wall during your next renovation.

For most of our product range, standard delivery takes 10–14 calendar days, as the wallpaper must be ordered from the manufacturer’s warehouse in Germany.

Express delivery is available within 5 business days. Please contact our team for pricing and exact delivery times. You can use the contact form below to reach us.

🚀 Delivery time for wallpapers marked with “🚀”: 2 business days (Latvia, Lithuania, Estonia) and 4–5 business days for other European countries.

📦 All our wallpapers are delivered in a sturdy cardboard box that protects against damage during transport.

🚚 Delivery methods: pickup at the office; delivery to a parcel locker; delivery by courier.

All wallpaper is delivered from a single batch/series.
If you ran out of wallpaper and are placing a repeat order, please contact
our team; otherwise, we cannot guarantee that you will receive wallpaper from the same series/batch again.

If you like simple renovations, choose wallpaper with a matte surface and fine texture, which are particularly easy to apply thanks to the straight 64 cm match. The strips are applied so that the pattern always remains at the same height - this is practical for achieving a uniform wall finish. Thanks to the paste-the-wall technique, the wallpaper can be applied without special prior knowledge. Colors remain unchanged for a long time even in strong sunlight and hardly change under the influence of light. Dirt can be easily removed with soapy water and a brush, as the material is highly resistant to rubbing. For anyone who comes up with something new later: the wallpaper can easily be removed when soaked.
The wallpaper motif is in a minimalist style, with a slightly rough texture, in a light, warm gray tone with a slight beige tint. The surface looks like fine, weather-exposed plaster or concrete, giving it a subtle industrial charm. The surface is adorned with irregularly arranged, sketched lines and distinct edges reminiscent of graphic drawings. These lines are in a darker gray-brown color and imitate slightly engraved or carved patterns, creating a fascinating interplay between restraint and expressive accents. The unobtrusive color palette creates a cozy, unobtrusive atmosphere and forms an ideal background for modern and urban interiors. The combination of a subtle used look and geometric elements also gives the room sophistication and timelessness.

A.S. Création Tapeten AG

Südstraße 47, 51645 Gummersbach, Deutschland (Germany)

contact@as-creation.de

+49 22 615420