Erismann non-woven wallpaper | Plaster effect in green | 4011337

Before starting work and hanging the wallpaper, please pay attention to the following aspects: check the article number, the batch number, and the pattern repeat symbols. Please keep the control slip and wallpaper samples.

Carefully prepare the surface

Surface preparation – the surface must be dry, sound, capable of absorbing moisture evenly, clean, neutral, and smooth. Old wallpaper and water-soluble coatings must be removed. Cracks and holes should be filled with a spackling compound if necessary, while highly absorbent surfaces must be pre-primed with wallpaper paste (sizing). Old, unstable surfaces that cannot bear a load must be primed with a specially designed wallpaper primer.

Attention! Non-woven wallpaper must be hung on a uniformly colored surface. For this reason, we recommend applying a pigmented base coat under the wallpaper.

The adhesive must be applied directly to the wall.

We recommend using a high-quality, reliable brand of adhesive specifically designed for non-woven wallpaper, and following the preparation instructions provided. Thoroughly mix the non-woven wallpaper adhesive according to the manufacturer's guidelines. Using a roller, apply the adhesive to the wall over the width of the wallpaper roll.

 Hanging the wallpaper.

Hanging non-woven wallpaper always begins "from the light," which means that wallpapering the walls should start near a window. Ensure that the first strip of wallpaper is applied in a perfectly vertical line and properly aligned vertically, so that subsequent strips can be hung straight.

After the wall is coated with adhesive, the non-woven wallpaper is applied directly to the wall and smoothed out with a roller; moreover, this type of wallpaper requires no soaking time. Using a soft wallpapering brush, a cloth, or a microporous rubber roller, press the strip firmly against the wall and smooth it out to prevent the formation of air bubbles.

Trimming the excess and finishing up...

Trim the overhanging edges of the wallpaper at the top and bottom. Hang the subsequent strips of wallpaper perfectly edge-to-edge (butt joint). A conical seam roller can be used at the joints. Please note that strong heat and drafts must be avoided during application and drying. The optimal working temperature ranges from 18 °C to 25 °C.

Additional tips

Another advantage of decorating walls with non-woven wallpaper is that, if applied properly, it can be easily and completely removed dry from the wall during your next renovation.

For most of our product range, standard delivery takes 10–14 calendar days, as the wallpaper must be ordered from the manufacturer’s warehouse in Germany.

Express delivery is available within 5 business days. Please contact our team for pricing and exact delivery times. You can use the contact form below to reach us.

🚀 Delivery time for wallpapers marked with “🚀”: 2 business days (Latvia, Lithuania, Estonia) and 4–5 business days for other European countries.

📦 All our wallpapers are delivered in a sturdy cardboard box that protects against damage during transport.

🚚 Delivery methods: pickup at the office; delivery to a parcel locker; delivery by courier.

All wallpaper is delivered from a single batch/series.
If you ran out of wallpaper and are placing a repeat order, please contact
our team; otherwise, we cannot guarantee that you will receive wallpaper from the same series/batch again.

Bring the peace of nature and refreshing energy into your home with the German manufacturer Erismann high-quality non-woven wallpapers. This model in a cheerful and soft light green tone perfectly mimics the texture of fine decorative plaster. The matte and slightly textured surface creates a natural, "lively" wall appearance, making it visually more interesting than standard flat paint. These wallpapers are an ideal choice for bedrooms, nurseries, kitchens, or accent walls in a living room where you want to create a harmonious and cozy atmosphere.

Why do interior experts recommend these Erismann wallpapers?

• Premium thickness and defect hiding (200 g/m²): Thanks to the exceptionally high material density, the wallpapers are very durable and will last for years. The textured plaster finish perfectly masks minor wall unevenness and micro-cracks, ensuring a visually flawless result.

• 100% material utilization (Free match): You do not need to look for pattern matches between adjacent wallpaper strips (repeat 0 cm). This means a fast work process and no unnecessary material offcuts – you will use every centimeter of the roll.

• Fast and convenient installation (Paste-the-wall): The non-woven base allows you to apply wallpaper adhesive directly to the wall surface. The wallpapers do not need to be pre-soaked, they are easy to adjust on the wall, and do not shrink while drying.

• German reliability and sustainability: Erismann production is known for adhering to strict European quality, ecology, and health standards. The colors are resistant to solar UV radiation.

Technical Specifications

💡Expert application advice

To achieve a maximally natural plaster effect without visible seams, apply the wallpaper strips exactly next to each other. As the wallpapers have a 200 g/m² density, they will hold their shape perfectly during the work process. However, to ensure the light green tone looks excellent and even, we strongly recommend priming the wall before wallpapering with a white pigmented wallpaper primer. This will prevent previous wall paint or putty spots from shining through the material. Use high-quality adhesive intended for non-woven wallpapers.

Erismann & Cie. GmbH Tapetenfabrik

Hafenstraße 19, 79206 Breisach, Deutschland (Germany)

info@erismann.de

+ 49 7667 9090