Wallpaper | Light gray leaf pattern with a subtle sheen | 10.05x0.53m, 4010511

Before starting work and hanging the wallpaper, please pay attention to the following aspects: check the article number, the batch number, and the pattern repeat symbols. Please keep the control slip and wallpaper samples.

Carefully prepare the surface

Surface preparation – the surface must be dry, sound, capable of absorbing moisture evenly, clean, neutral, and smooth. Old wallpaper and water-soluble coatings must be removed. Cracks and holes should be filled with a spackling compound if necessary, while highly absorbent surfaces must be pre-primed with wallpaper paste (sizing). Old, unstable surfaces that cannot bear a load must be primed with a specially designed wallpaper primer.

Attention! Non-woven wallpaper must be hung on a uniformly colored surface. For this reason, we recommend applying a pigmented base coat under the wallpaper.

The adhesive must be applied directly to the wall.

We recommend using a high-quality, reliable brand of adhesive specifically designed for non-woven wallpaper, and following the preparation instructions provided. Thoroughly mix the non-woven wallpaper adhesive according to the manufacturer's guidelines. Using a roller, apply the adhesive to the wall over the width of the wallpaper roll.

 Hanging the wallpaper.

Hanging non-woven wallpaper always begins "from the light," which means that wallpapering the walls should start near a window. Ensure that the first strip of wallpaper is applied in a perfectly vertical line and properly aligned vertically, so that subsequent strips can be hung straight.

After the wall is coated with adhesive, the non-woven wallpaper is applied directly to the wall and smoothed out with a roller; moreover, this type of wallpaper requires no soaking time. Using a soft wallpapering brush, a cloth, or a microporous rubber roller, press the strip firmly against the wall and smooth it out to prevent the formation of air bubbles.

Trimming the excess and finishing up...

Trim the overhanging edges of the wallpaper at the top and bottom. Hang the subsequent strips of wallpaper perfectly edge-to-edge (butt joint). A conical seam roller can be used at the joints. Please note that strong heat and drafts must be avoided during application and drying. The optimal working temperature ranges from 18 °C to 25 °C.

Additional tips

Another advantage of decorating walls with non-woven wallpaper is that, if applied properly, it can be easily and completely removed dry from the wall during your next renovation.

For most of our product range, standard delivery takes 10–14 calendar days, as the wallpaper must be ordered from the manufacturer’s warehouse in Germany.

Express delivery is available within 5 business days. Please contact our team for pricing and exact delivery times. You can use the contact form below to reach us.

🚀 Delivery time for wallpapers marked with “🚀”: 2 business days (Latvia, Lithuania, Estonia) and 4–5 business days for other European countries.

📦 All our wallpapers are delivered in a sturdy cardboard box that protects against damage during transport.

🚚 Delivery methods: pickup at the office; delivery to a parcel locker; delivery by courier.

All wallpaper is delivered from a single batch/series.
If you ran out of wallpaper and are placing a repeat order, please contact
our team; otherwise, we cannot guarantee that you will receive wallpaper from the same series/batch again.

Bring nature-inspired lightness and visual dynamics to your interior with the German manufacturer Erismann design non-woven wallpapers. This sophisticated model stands out with a fine, textured leaf (botanical) motif in a clear and light grey tone. The "highlight" of the design is its wonderful interplay of light and textures – the leaf pattern has an elegantly matte surface that tastefully contrasts with the slightly glossy, pearlescent background. Depending on the room's lighting, the wallpapers will look slightly different at each part of the day, creating a luxurious and spacious atmosphere. An ideal choice for a modern living room, a bright bedroom, or an aesthetic home office.

Why choose these Erismann design wallpapers?

• Contrast of light and textures: Combining the matte relief with a slightly glossy background, the wallpapers visually expand the space and give the walls "liveliness" without leaving a flat impression.

• Optimal thickness (180 g/m²): The 180 g/m² non-woven density ensures material stability both during the pasting process and in everyday use. The expressive texture helps successfully hide minor wall cosmetic unevenness.

• Simplified pasting: The non-woven base guarantees a clean and fast renovation process. The adhesive must be applied directly to the wall, and the wallpapers do not shrink or deform during drying.

• German quality and sustainability: The Erismann brand guarantees the highest European ecological standards. The wallpapers maintain their color clarity for a long time and are resistant to sunlight.

Technical Specifications

💡Expert application advice

This elegant design has a large pattern match step – 64 cm, which means that each subsequent strip must be shifted so that the botanical pattern perfectly continues without breaks.

• Accurate roll calculation: We respect your time and budget, so we have calculated that in standard rooms, if the ceiling height is up to 290 cm, you will get exactly 3 full wallpaper strips from one roll. Please take this into account when calculating the required number of rolls for your wall width!

• Wall preparation: Since the wallpapers have a light tone and a slightly glossy background, which tends to "highlight" base imperfections, we strongly recommend priming the wall with an even, white pigmented wallpaper primer before pasting. This will ensure a flawlessly light base and prevent dark spots from shining through the material.

Erismann & Cie. GmbH Tapetenfabrik

Hafenstraße 19, 79206 Breisach, Deutschland (Germany)

info@erismann.de

+ 49 7667 9090