RASCH Wallpaper 2155204 | Watercolour botanical motif in earthy tones

Before starting work and hanging the wallpaper, please pay attention to the following aspects: check the article number, the batch number, and the pattern repeat symbols. Please keep the control slip and wallpaper samples.

Carefully prepare the surface

Surface preparation – the surface must be dry, sound, capable of absorbing moisture evenly, clean, neutral, and smooth. Old wallpaper and water-soluble coatings must be removed. Cracks and holes should be filled with a spackling compound if necessary, while highly absorbent surfaces must be pre-primed with wallpaper paste (sizing). Old, unstable surfaces that cannot bear a load must be primed with a specially designed wallpaper primer.

Attention! Non-woven wallpaper must be hung on a uniformly colored surface. For this reason, we recommend applying a pigmented base coat under the wallpaper.

The adhesive must be applied directly to the wall.

We recommend using a high-quality, reliable brand of adhesive specifically designed for non-woven wallpaper, and following the preparation instructions provided. Thoroughly mix the non-woven wallpaper adhesive according to the manufacturer's guidelines. Using a roller, apply the adhesive to the wall over the width of the wallpaper roll.

 Hanging the wallpaper.

Hanging non-woven wallpaper always begins "from the light," which means that wallpapering the walls should start near a window. Ensure that the first strip of wallpaper is applied in a perfectly vertical line and properly aligned vertically, so that subsequent strips can be hung straight.

After the wall is coated with adhesive, the non-woven wallpaper is applied directly to the wall and smoothed out with a roller; moreover, this type of wallpaper requires no soaking time. Using a soft wallpapering brush, a cloth, or a microporous rubber roller, press the strip firmly against the wall and smooth it out to prevent the formation of air bubbles.

Trimming the excess and finishing up...

Trim the overhanging edges of the wallpaper at the top and bottom. Hang the subsequent strips of wallpaper perfectly edge-to-edge (butt joint). A conical seam roller can be used at the joints. Please note that strong heat and drafts must be avoided during application and drying. The optimal working temperature ranges from 18 °C to 25 °C.

Additional tips

Another advantage of decorating walls with non-woven wallpaper is that, if applied properly, it can be easily and completely removed dry from the wall during your next renovation.

For most of our product range, standard delivery takes 10–14 calendar days, as the wallpaper must be ordered from the manufacturer’s warehouse in Germany.

Express delivery is available within 5 business days. Please contact our team for pricing and exact delivery times. You can use the contact form below to reach us.

🚀 Delivery time for wallpapers marked with “🚀”: 2 business days (Latvia, Lithuania, Estonia) and 4–5 business days for other European countries.

📦 All our wallpapers are delivered in a sturdy cardboard box that protects against damage during transport.

🚚 Delivery methods: pickup at the office; delivery to a parcel locker; delivery by courier.

All wallpaper is delivered from a single batch/series.
If you ran out of wallpaper and are placing a repeat order, please contact
our team; otherwise, we cannot guarantee that you will receive wallpaper from the same series/batch again.

The distinctive feature of this wallpaper is its artistic, free-flowing botanical pattern, in which warm terracotta (clay), golden sand and cool sage green tones blend harmoniously against a creamy white background.

The key added value of this design is its deeply matt finish, which is complemented by a subtle, tactile fabric-like texture (linen or fine canvas). Visually, this design mimics hand-painted, natural textiles, completely eliminating any unwanted sheen and giving the walls a distinctly organic, noble and visually soft appearance.

In interior design and environmental psychology, this combination of natural motifs, earthy tones and a matt fabric texture is the ideal approach to creating a relaxing, biophilic (nature-inspired) and exceptionally cosy space.

The psychological aspect and its impact on the space:

• Biophilic design and emotional warmth: The flowing leaf motifs, combined with a natural colour palette, subconsciously create a strong connection with the outdoors. This combination acts as a visual stress reliever, reducing everyday anxiety and filling the space with emotional warmth and vitality, whilst not overloading the nervous system.

• Ideal thermal balance and a sense of security: The combination of warm terracotta and beige tones with cool sage-green accents creates the perfect thermal and emotional balance. Meanwhile, the matt, fabric-like texture removes any architectural ‘coldness’ from the walls, lending them a tangible sense of solidity and creating a safe, enveloping atmosphere of refuge.

• Natural light diffusion and flaw concealment: The deeply matt texture perfectly absorbs and gently diffuses natural and artificial light, eliminating irritating glare even on sunny days. The pronounced texture of the fabric, combined with the dense, variegated leaf pattern, creates a superb illusion of 3D depth and flawlessly conceals minor wall imperfections, resulting in an elegant and polished overall look.

Expert recommendations for room selection:

Thanks to its ability to bring natural harmony, visual lightness and a tangible sense of cosiness to a room, this wallpaper is particularly suitable for:

• Living rooms and dining areas: as a striking backdrop that pairs beautifully with natural wood furniture, woven (rattan, wicker) décor, ceramics and linen textiles, creating a contemporary Boho, Eco or warm Scandinavian-style interior.

• For bedrooms: to create a warm, calming and visually (as well as tactilely) soft environment that promotes relaxation and evokes a nature-surrounded oasis.

• For brightly lit rooms: where a matt finish and greenish accents will help balance the room’s atmosphere by diffusing direct sunlight without harsh glare.

Manufacturer: RASCH (Germany)
Material: Non-woven backing (easy to apply and remove)
Surface finish: Matt and slightly textured
Roll size: 10.05 m x 0.53 m (5.3 m²)
Pattern matching: 32 cm
Yield per roll: 3 strips (for ceiling heights up to 300 cm)

Tapetenfabrik Gebr. Rasch GmbH & Co. KG

Raschplatz 1, 49565 Bramsche, Deutschland (Germany

info@rasch.de

+4954618110