Decorative wallpaper with palm leaves in strong purple - 3011642

Before starting work and hanging the wallpaper, please pay attention to the following aspects: check the article number, the batch number, and the pattern repeat symbols. Please keep the control slip and wallpaper samples.

Carefully prepare the surface

Surface preparation – the surface must be dry, sound, capable of absorbing moisture evenly, clean, neutral, and smooth. Old wallpaper and water-soluble coatings must be removed. Cracks and holes should be filled with a spackling compound if necessary, while highly absorbent surfaces must be pre-primed with wallpaper paste (sizing). Old, unstable surfaces that cannot bear a load must be primed with a specially designed wallpaper primer.

Attention! Non-woven wallpaper must be hung on a uniformly colored surface. For this reason, we recommend applying a pigmented base coat under the wallpaper.

The adhesive must be applied directly to the wall.

We recommend using a high-quality, reliable brand of adhesive specifically designed for non-woven wallpaper, and following the preparation instructions provided. Thoroughly mix the non-woven wallpaper adhesive according to the manufacturer's guidelines. Using a roller, apply the adhesive to the wall over the width of the wallpaper roll.

 Hanging the wallpaper.

Hanging non-woven wallpaper always begins "from the light," which means that wallpapering the walls should start near a window. Ensure that the first strip of wallpaper is applied in a perfectly vertical line and properly aligned vertically, so that subsequent strips can be hung straight.

After the wall is coated with adhesive, the non-woven wallpaper is applied directly to the wall and smoothed out with a roller; moreover, this type of wallpaper requires no soaking time. Using a soft wallpapering brush, a cloth, or a microporous rubber roller, press the strip firmly against the wall and smooth it out to prevent the formation of air bubbles.

Trimming the excess and finishing up...

Trim the overhanging edges of the wallpaper at the top and bottom. Hang the subsequent strips of wallpaper perfectly edge-to-edge (butt joint). A conical seam roller can be used at the joints. Please note that strong heat and drafts must be avoided during application and drying. The optimal working temperature ranges from 18 °C to 25 °C.

Additional tips

Another advantage of decorating walls with non-woven wallpaper is that, if applied properly, it can be easily and completely removed dry from the wall during your next renovation.

For most of our product range, standard delivery takes 10–14 calendar days, as the wallpaper must be ordered from the manufacturer’s warehouse in Germany.

Express delivery is available within 5 business days. Please contact our team for pricing and exact delivery times. You can use the contact form below to reach us.

🚀 Delivery time for wallpapers marked with “🚀”: 2 business days (Latvia, Lithuania, Estonia) and 4–5 business days for other European countries.

📦 All our wallpapers are delivered in a sturdy cardboard box that protects against damage during transport.

🚚 Delivery methods: pickup at the office; delivery to a parcel locker; delivery by courier.

All wallpaper is delivered from a single batch/series.
If you ran out of wallpaper and are placing a repeat order, please contact
our team; otherwise, we cannot guarantee that you will receive wallpaper from the same series/batch again.

The matt surface and fine texture give a pleasant feel on the wall. The wallpaper is easy to apply using an adhesive application technique as there is no need to match the pattern exactly - the pattern is not repeated, so the panels can simply be stacked next to each other. Colours remain bright even in strong sunlight and even minor accidents, such as children's hands, can be easily removed with soapy water and a brush. Removal is easy if you are renovating later: if the wallpaper is well dampened, it can be removed in one piece. A practical detail for families who appreciate easy-care interiors.
The wallpaper features a large jungle-style leaf pattern with different tropical leaf shapes, such as monstera and fern leaves, placed close together. All wallpapers are produced in a monochrome berry colour palette, ranging from deep burgundy to a lighter raspberry shade. The leaves look almost hand-painted thanks to the soft shadows and detailed finishing. The pattern is gorgeous but clearly textured, capturing the natural vibrancy of the rainforest. The choice of colours creates a warm, inviting and luxurious atmosphere with a touch of exoticism and elegance. The overall look is strong and intense, but not cluttered, balanced and stylish.

A.S. Création Tapeten AG

Südstraße 47, 51645 Gummersbach, Deutschland (Germany)

contact@as-creation.de

+49 22 615420