Decorative wallpaper with palm leaves in pink - 3011641

Before starting work and hanging the wallpaper, please pay attention to the following aspects: check the article number, the batch number, and the pattern repeat symbols. Please keep the control slip and wallpaper samples.

Carefully prepare the surface

Surface preparation – the surface must be dry, sound, capable of absorbing moisture evenly, clean, neutral, and smooth. Old wallpaper and water-soluble coatings must be removed. Cracks and holes should be filled with a spackling compound if necessary, while highly absorbent surfaces must be pre-primed with wallpaper paste (sizing). Old, unstable surfaces that cannot bear a load must be primed with a specially designed wallpaper primer.

Attention! Non-woven wallpaper must be hung on a uniformly colored surface. For this reason, we recommend applying a pigmented base coat under the wallpaper.

The adhesive must be applied directly to the wall.

We recommend using a high-quality, reliable brand of adhesive specifically designed for non-woven wallpaper, and following the preparation instructions provided. Thoroughly mix the non-woven wallpaper adhesive according to the manufacturer's guidelines. Using a roller, apply the adhesive to the wall over the width of the wallpaper roll.

 Hanging the wallpaper.

Hanging non-woven wallpaper always begins "from the light," which means that wallpapering the walls should start near a window. Ensure that the first strip of wallpaper is applied in a perfectly vertical line and properly aligned vertically, so that subsequent strips can be hung straight.

After the wall is coated with adhesive, the non-woven wallpaper is applied directly to the wall and smoothed out with a roller; moreover, this type of wallpaper requires no soaking time. Using a soft wallpapering brush, a cloth, or a microporous rubber roller, press the strip firmly against the wall and smooth it out to prevent the formation of air bubbles.

Trimming the excess and finishing up...

Trim the overhanging edges of the wallpaper at the top and bottom. Hang the subsequent strips of wallpaper perfectly edge-to-edge (butt joint). A conical seam roller can be used at the joints. Please note that strong heat and drafts must be avoided during application and drying. The optimal working temperature ranges from 18 °C to 25 °C.

Additional tips

Another advantage of decorating walls with non-woven wallpaper is that, if applied properly, it can be easily and completely removed dry from the wall during your next renovation.

For most of our product range, standard delivery takes 10–14 calendar days, as the wallpaper must be ordered from the manufacturer’s warehouse in Germany.

Express delivery is available within 5 business days. Please contact our team for pricing and exact delivery times. You can use the contact form below to reach us.

🚀 Delivery time for wallpapers marked with “🚀”: 2 business days (Latvia, Lithuania, Estonia) and 4–5 business days for other European countries.

📦 All our wallpapers are delivered in a sturdy cardboard box that protects against damage during transport.

🚚 Delivery methods: pickup at the office; delivery to a parcel locker; delivery by courier.

All wallpaper is delivered from a single batch/series.
If you ran out of wallpaper and are placing a repeat order, please contact
our team; otherwise, we cannot guarantee that you will receive wallpaper from the same series/batch again.

Add elegance to your home with this stylish wallpaper in delicate shades of pink and beige. The slightly textured, matt surface creates a pleasant feeling in the room, while the excellent light fastness guarantees that the colours will not fade even in intense sunlight. The adhesive wallpaper technique facilitates application: thanks to the seamless repetition of the pattern, the panels can be seamlessly joined without having to follow a specific pattern. The high abrasion resistance makes it easy to remove dirt with soapy water and a brush. When renovating a room, the wallpaper can be easily removed from the wall once it has been soaked, making remodelling particularly easy.
The motif depicts a colourful leaf pattern consisting of various tropical plants, such as monstera and palm leaves, spread evenly over the entire surface. The leaves are designed as a filigree pattern with many fine details and overlays, which together create a lively but harmonious effect. The colour palette is delicate, in shades of powdery grey-brown and pink, giving the pattern a restrained, almost monochrome character. It creates a subtle, elegant atmosphere with a vintage charm. The interplay of tropical leaves and soft colours creates a calm, relaxed effect and makes the room feel cosy and modern.

A.S. Création Tapeten AG

Südstraße 47, 51645 Gummersbach, Deutschland (Germany)

contact@as-creation.de

+49 22 615420