Non-woven wallpaper | Crocodile skin imitation | Gray/Taupe | 4010357

Before starting work and hanging the wallpaper, please pay attention to the following aspects: check the article number, the batch number, and the pattern repeat symbols. Please keep the control slip and wallpaper samples.

Carefully prepare the surface

Surface preparation – the surface must be dry, sound, capable of absorbing moisture evenly, clean, neutral, and smooth. Old wallpaper and water-soluble coatings must be removed. Cracks and holes should be filled with a spackling compound if necessary, while highly absorbent surfaces must be pre-primed with wallpaper paste (sizing). Old, unstable surfaces that cannot bear a load must be primed with a specially designed wallpaper primer.

Attention! Non-woven wallpaper must be hung on a uniformly colored surface. For this reason, we recommend applying a pigmented base coat under the wallpaper.

The adhesive must be applied directly to the wall.

We recommend using a high-quality, reliable brand of adhesive specifically designed for non-woven wallpaper, and following the preparation instructions provided. Thoroughly mix the non-woven wallpaper adhesive according to the manufacturer's guidelines. Using a roller, apply the adhesive to the wall over the width of the wallpaper roll.

 Hanging the wallpaper.

Hanging non-woven wallpaper always begins "from the light," which means that wallpapering the walls should start near a window. Ensure that the first strip of wallpaper is applied in a perfectly vertical line and properly aligned vertically, so that subsequent strips can be hung straight.

After the wall is coated with adhesive, the non-woven wallpaper is applied directly to the wall and smoothed out with a roller; moreover, this type of wallpaper requires no soaking time. Using a soft wallpapering brush, a cloth, or a microporous rubber roller, press the strip firmly against the wall and smooth it out to prevent the formation of air bubbles.

Trimming the excess and finishing up...

Trim the overhanging edges of the wallpaper at the top and bottom. Hang the subsequent strips of wallpaper perfectly edge-to-edge (butt joint). A conical seam roller can be used at the joints. Please note that strong heat and drafts must be avoided during application and drying. The optimal working temperature ranges from 18 °C to 25 °C.

Additional tips

Another advantage of decorating walls with non-woven wallpaper is that, if applied properly, it can be easily and completely removed dry from the wall during your next renovation.

For most of our product range, standard delivery takes 10–14 calendar days, as the wallpaper must be ordered from the manufacturer’s warehouse in Germany.

Express delivery is available within 5 business days. Please contact our team for pricing and exact delivery times. You can use the contact form below to reach us.

🚀 Delivery time for wallpapers marked with “🚀”: 2 business days (Latvia, Lithuania, Estonia) and 4–5 business days for other European countries.

📦 All our wallpapers are delivered in a sturdy cardboard box that protects against damage during transport.

🚚 Delivery methods: pickup at the office; delivery to a parcel locker; delivery by courier.

All wallpaper is delivered from a single batch/series.
If you ran out of wallpaper and are placing a repeat order, please contact
our team; otherwise, we cannot guarantee that you will receive wallpaper from the same series/batch again.

Bring a truly exclusive and unforgettable atmosphere to your interior with the German manufacturer Erismann design non-woven wallpapers. This bold model flawlessly mimics the texture of crocodile or reptile skin in an elegant and muted grey-brown (taupe) tone. The matte, textured surface gives the design incredible realism and three-dimensional (3D) depth, making the wall literally "alive". This is an ideal choice for a luxurious accent wall in a living room, a masculine home office, a modern bedroom, or a stylish commercial space (like a boutique or salon).

Why choose these Erismann design wallpapers?

• Realistic luxury texture: Unlike flat paper wallpapers, this model has a distinct relief and matte finish that does not reflect distracting light, allowing the leather imitation to look expensive and natural.

• High durability (175 g/m²): The optimal non-woven thickness ensures material stability both during the pasting process and in everyday use. Furthermore, the rich texture perfectly helps visually hide minor wall cosmetic unevenness.

• Convenient "Paste-the-wall" technology: Thanks to the non-woven base, the renovation process is significantly cleaner and faster. The adhesive needs to be applied directly to the wall, and the wallpapers do not shrink during drying.

• German quality guarantee: Erismann is a globally recognized brand that guarantees the highest ecological and manufacturing standards, as well as color fastness to UV radiation.

Technical Specifications

💡Expert application advice

When pasting this sophisticated model, special attention must be paid to the pattern match (64 cm). This means that each subsequent strip will need to be shifted so that the "leather scales" pattern perfectly continues without a visual break.

Important: Due to the specifics of this design, material offcuts will occur. When calculating the necessary number of rolls, we always recommend ordering 1-2 rolls more than the minimum needed for the net square meter area.

Before pasting, we recommend priming the wall with a uniform tone primer to ensure perfect and long-lasting adhesion. Use only adhesive intended for non-woven wallpapers!

Erismann & Cie. GmbH Tapetenfabrik

Hafenstraße 19, 79206 Breisach, Deutschland (Germany)

info@erismann.de

+ 49 7667 9090