Striped wallpaper with an exclusive silk shimmer (moiré) effect, 2727573

Before starting work and hanging the wallpaper, please pay attention to the following aspects: check the article number, the batch number, and the pattern repeat symbols. Please keep the control slip and wallpaper samples.

Carefully prepare the surface

Surface preparation – the surface must be dry, sound, capable of absorbing moisture evenly, clean, neutral, and smooth. Old wallpaper and water-soluble coatings must be removed. Cracks and holes should be filled with a spackling compound if necessary, while highly absorbent surfaces must be pre-primed with wallpaper paste (sizing). Old, unstable surfaces that cannot bear a load must be primed with a specially designed wallpaper primer.

Attention! Non-woven wallpaper must be hung on a uniformly colored surface. For this reason, we recommend applying a pigmented base coat under the wallpaper.

The adhesive must be applied directly to the wall.

We recommend using a high-quality, reliable brand of adhesive specifically designed for non-woven wallpaper, and following the preparation instructions provided. Thoroughly mix the non-woven wallpaper adhesive according to the manufacturer's guidelines. Using a roller, apply the adhesive to the wall over the width of the wallpaper roll.

 Hanging the wallpaper.

Hanging non-woven wallpaper always begins "from the light," which means that wallpapering the walls should start near a window. Ensure that the first strip of wallpaper is applied in a perfectly vertical line and properly aligned vertically, so that subsequent strips can be hung straight.

After the wall is coated with adhesive, the non-woven wallpaper is applied directly to the wall and smoothed out with a roller; moreover, this type of wallpaper requires no soaking time. Using a soft wallpapering brush, a cloth, or a microporous rubber roller, press the strip firmly against the wall and smooth it out to prevent the formation of air bubbles.

Trimming the excess and finishing up...

Trim the overhanging edges of the wallpaper at the top and bottom. Hang the subsequent strips of wallpaper perfectly edge-to-edge (butt joint). A conical seam roller can be used at the joints. Please note that strong heat and drafts must be avoided during application and drying. The optimal working temperature ranges from 18 °C to 25 °C.

Additional tips

Another advantage of decorating walls with non-woven wallpaper is that, if applied properly, it can be easily and completely removed dry from the wall during your next renovation.

For most of our product range, standard delivery takes 10–14 calendar days, as the wallpaper must be ordered from the manufacturer’s warehouse in Germany.

Express delivery is available within 5 business days. Please contact our team for pricing and exact delivery times. You can use the contact form below to reach us.

🚀 Delivery time for wallpapers marked with “🚀”: 2 business days (Latvia, Lithuania, Estonia) and 4–5 business days for other European countries.

📦 All our wallpapers are delivered in a sturdy cardboard box that protects against damage during transport.

🚚 Delivery methods: pickup at the office; delivery to a parcel locker; delivery by courier.

All wallpaper is delivered from a single batch/series.
If you ran out of wallpaper and are placing a repeat order, please contact
our team; otherwise, we cannot guarantee that you will receive wallpaper from the same series/batch again.

AS Creation 2727573 Striped Vinyl Wallpaper – Pristine white and a sophisticated silk moiré sheen

Are you looking for a design solution that will visually expand the space and give it a light, aristocratic elegance? Vertically striped white wallpaper (model 2727573) from Germany’s leading brand AS Creation is an excellent choice. The white color creates a maximum sense of cleanliness and spaciousness, while the classic striped pattern is a proven technique for visually “lengthening” walls and raising low ceilings.

The main aesthetic value of this model is its smooth surface with an exclusive silk sheen (moiré) effect. The fine, wavy transitions within the stripes react to every ray of light, creating an elegant and dynamic play on the wall that eliminates monotony and makes the interior look expensive and sophisticated.

Why choose this particular model? Expert review:

• Exclusive light reflection effect: The smooth, glossy surface perfectly diffuses natural and artificial light. It is the ideal solution for darker rooms that need extra brightness.

• Durability of the specially washable surface: Despite its delicate and elegant appearance, the wallpaper features a high-quality, dense vinyl protective layer. It is highly resistant to moisture and abrasion, meaning the surface can be safely cleaned and is practical not only for the living room or bedroom, but also for the hallway and corridor.

• Quick application with no material waste (0 cm): This model features 0 cm pattern alignment. The striped strips can be cut and glued one after another without worrying about pattern misalignment or having to search for the pattern. This guarantees maximum speed and virtually zero material waste.

• High resistance to sunlight and UV rays: Manufactured in Germany to the highest standards—the wallpaper is protected against fading and UV radiation. The white color and silky sheen will not yellow even in rooms with large south-facing windows.

Technical Specifications

Technical parameters will help you accurately plan your renovation and calculate the amount of materials needed:

Expert tip for perfect gluing:

1. Wall preparation: Since the wallpaper has a smooth and glossy surface, the substrate (wall) must be carefully prepared, level, and uniform in tone. Shiny surfaces under strong side lighting can highlight significant wall irregularities, so before applying the wallpaper, make sure the wall is properly spackled and primed.

2. Application instructions: Since the backing is made of paper, wallpaper paste must be applied to the cut sheet. Allow it to soak in for 3–5 minutes and spread evenly. To fully protect the smooth, glossy surface from accidental scratches, use a soft rubber roller or a special soft brush to smooth out the sheets, rather than a hard plastic spatula.

3. Uniform visual effect: Make sure all sheets are cut and glued in the same direction (from one end of the roll). This will ensure a completely uniform and identical reflection of light along the entire length of the wall. However, since the pattern does not need to be matched, even beginners can handle this project!

A.S. Création Tapeten AG

Südstraße 47, 51645 Gummersbach, Deutschland (Germany)

contact@as-creation.de

+49 22 615420